TM 5-3805-293-23-2
0024
Table 1. Window Wipers and Washers Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. RH Door Wiper Does Not
5. Turn battery disconnect switch
Operate Properly - Con-
and ignition switch to ON position
tinued
(TM 5-3805-293-10).
6. Turn LH door wiper/washer con-
RH Door Wiper Works in All Posi-
trol to LOW, HIGH, and PARK
tions - Turn ignition switch and bat-
position (TM 5-3805-293-10).
tery disconnect switch to OFF position
(TM 5-3805-293-10).
Disconnect R-C32 (WP 0009, Figure
363) from LH door wiper washer
switch (WP 0274).
Replace RH door wiper washer switch
(WP 0274).
Connect R-C31 (WP 0009, Figure
367) on LH door wiper washer switch
(WP 0274).
Proceed to step 7.
RH Door Wiper Does Not Work in
High Position - Proceed to Test Step
22.
RH Door Wiper Does Not Work in
Low Position - Proceed to Test Step
24.
RH Door Wiper Does Not Return to
Park Position - Proceed to Test Step
26.
7. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-3805-293-10).
8. Turn right door wiper/washer con- Right Door Wiper Does Not Work in
One Or More Positions Or Does Not
trol to LOW, HIGH, and PARK
Return To Park - Repeat trouble-
position (TM 5-3805-293-10).
shooting from beginning.
Right Door Wiper Works In Low,
and High Position, and Returns to
Park - Troubleshooting complete.
Test Step 22. Test 528-PK High
Speed Circuit for High Resistance
or Open in Cab Upper Wiring Har-
ness.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-293-10).
2. Disconnect cab upper wiring har-
ness connector R-C32 (WP 0009,
Figure 363) from LH door wiper
washer switch.
0024-71
