TM 5-3805-293-23-2
0024
Table 1. Window Wipers and Washers Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. RH Door Wiper Does Not
Test Step 3. Test for Open Fuse F1.
Operate Properly - Con-
Using digital multimeter, measure for Voltage Within 18-26 Volts - Proceed
tinued
18-26 Volts between fuse F15 top ter- to Test Step 4.
minal (Figure 6) and machine ground. Voltage Not Within 18-26 Volts -
Turn ignition switch and battery dis-
connect switch to the OFF position
(TM 5-3805-293-10).
Remove fuse F15 from fuse box (TM
5-3805-293-10) and discard fuse.
Proceed to Test Step 9.
Figure 6. Fuse F15 Top Terminal.
0024
Test Step 4. Test 119-PK Fused
Wiper Washer Circuit Voltage to RH
Door Wiper Washer Switch.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-293-10).
2. Disconnect cab upper wiring har-
ness connector R-C32 (WP 0009,
Figure 363) from RH door wiper
washer switch (WP 0274).
3. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-3805-293-10).
