TM 5-3805-293-23-2
0023
Table 1. Cab Electrical Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
14. Right Position Light and/ 14. Using digital multimeter, test for
Resistance 5.0 Ohms Or Less -
or Tail Light Does Not
continuity between harness con-
Replace cab lower wiring harness
Operate - Continued
nector P-C11 (WP 0009, Figure
(WP 0266).
286) terminal 1 and terminal 6.
Install dimmer relay (WP 0009, Figure
Resistance should be less than
296) on fuse panel.
5.0 ohms.
Install headlamp relay (WP 0009, Fig-
ure 298) on fuse panel.
Connect the front work light wiring
harness connector CL-C24 (WP 0009,
Figure 393) to front lighting wiring har-
ness connector A-C4 (WP 0009, Fig-
ure 394) (WP 0196).
Connect the front work light wiring
harness connector CL-C26 (WP 0009,
Figure 293) to front lighting wiring har-
ness connector A-C3 (WP 0009, Fig-
ure 292) (WP 0196).
Connect the connector AA-C2 (WP
0009, Figure 291) to right headlight.
Connect the connector AZ-C6 (WP
0009, Figure 392) to right headlight
and install headlight assembly (WP
0197).
Connect control indicator switch har-
ness connector PE-C10 (WP 0009,
Figure 288) to control indicator switch
(WP 0009, Figure 289).
Proceed to step 15.
0023-84