TM 5-3805-293-23-2
0023
Table 1. Cab Electrical Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
14. Right Position Light and/ 7. Using digital multimeter, test for
Resistance 5.0 Ohms Or Less - Pro-
or Tail Light Does Not
continuity between dimmer relay
ceed to step 8.
Operate - Continued
socket D11 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
295) and harness connector P-
Replace cab lower wiring harness
C61 terminal 5.
(WP 0266).
Resistance should be less than
Install dimmer relay (WP 0009, Figure
5.0 ohms.
296) on fuse panel.
Connect the front work light wiring
harness connector CL-C24 (WP 0009,
Figure 393) to front lighting wiring har-
ness connector A-C4 (WP 0009, Fig-
ure 394) (WP 0196).
Connect the front work light wiring
harness connector CL-C26 (WP 0009,
Figure 293) to front lighting wiring har-
ness connector A-C3 (WP 0009, Fig-
ure 292) (WP 0196).
Connect the connector AA-C2 (WP
0009, Figure 291) to right headlight.
Connect the connector AZ-C6 (WP
0009, Figure 392) to right headlight
and install headlight assembly (WP
0197).
Proceed to step 15.
8. Remove headlamp relay (WP
0009, Figure 298) from fuse
panel.
0023-81