TM 5-3805-293-23-2
0023
Table 1. Cab Electrical Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
14. Right Position Light and/ 9. Using digital multimeter, test for
Resistance 5.0 Ohms Or Less - Pro-
or Tail Light Does Not
continuity between headlamp
ceed to step 10.
Operate - Continued
relay socket C14 (WP 0009, Fig-
Resistance More Than 5.0 Ohms -
ure 297) and harness connector
Replace cab lower wiring harness
P-C11 terminal 6.
(WP 0266).
Resistance should be less than
Install dimmer relay (WP 0009, Figure
5.0 ohms.
296) on fuse panel.
Install headlamp relay (WP 0009, Fig-
ure 298) on fuse panel.
Connect the front work light wiring
harness connector CL-C24 (WP 0009,
Figure 393) to front lighting wiring har-
ness connector A-C4 (WP 0009, Fig-
ure 394) (WP 0196).
Connect the front work light wiring
harness connector CL-C26 (WP 0009,
Figure 293) to front lighting wiring har-
ness connector A-C3 (WP 0009, Fig-
ure 292) (WP 0196).
Connect the connector AA-C2 (WP
0009, Figure 291) to right headlight.
Connect the connector AZ-C6 (WP
0009, Figure 392) to right headlight
and install headlight assembly (WP
0197).
Proceed to step 15.
0023-82