TM 5-3805-293-23-2
0020
Table 1. Transmission Code (2113-03 TO 2304-06) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2252-04 Machine Articula-
Test Step 3. Check for Shorted Rear
tion Angle Sensor #2 Volt-
Chassis Wiring Harness.
age Below Normal -
1. Turn ignition switch and battery
Continued
disconnect switch to the OFF
position (TM 5-3805-293-10).
2. Disconnect cab lower wiring har-
ness connector P-C39 (WP 0009,
Figure 70) from Implement 1 ECM
J2 (WP 0009, Figure 71) (WP
0268).
3. Disconnect rear chassis harness
connector FA-C20 (WP 0009, Fig-
ure 113) from transmission ECM
J1 (WP 0009, Figure 112) (WP
0137).
4. Disconnect rear chassis harness
connector FA-C21 (WP 0009, Fig-
ure 124) from transmission ECM
J2 (WP 0009, Figure 112).
5. Using digital multimeter, test for
Continuity - Proceed to Test Step 4.
continuity between rear chassis
No Continuity - Proceed to Test Step
harness connector FA-C21 (WP
5.
0009, Figure 124) terminal 17 and
machine ground. There should be
no continuity.
0020-132