TM 5-3805-293-23-2
0020
Table 1. Transmission Code (2113-03 TO 2304-06) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2201-14 Left Steering Cylin-
7. Using the MSD (WP 0006), select
2200-14 Code Becomes Active -
der Position Sensor Special
Trans/chassis 120M and check if
Disconnect UA-C2 (WP 0009, Figure
Instruction - Continued
2200-14 becomes active.
192) from right steering position sen-
sor (WP 0009, Figure 197).
Disconnect UC-C2 (WP 0009, Figure
196) from left steering position sensor
(WP 0009, Figure 193).
Right steering position sensor is
faulty, replace right steering cylinder
(WP 0169).
Connect the steering position sensor
harness UA-C2 (WP 0009, Figure
192) to left steering position sensor
(WP 0009, Figure 193) (WP 0169).
Proceed to step 8.
2201-14 Code Remains Active -
Replace transmission ECM (WP
0137).
Disconnect UA-C2 (WP 0009, Figure
192) from right steering position sen-
sor (WP 0009, Figure 197).
Disconnect UC-C2 (WP 0009, Figure
196) from left steering position sensor
(WP 0009, Figure 193).
Connect the steering position sensor
harness UA-C2 (WP 0009, Figure
192) to left steering position sensor
(WP 0009, Figure 193) (WP 0169).
Connect the steering position sensor
harness UC-C2 (WP 0009, Figure
196) to right steering position sensor
(WP 0009, Figure 197) (WP 0169).
Proceed to step 8.
8. Using the MSD (WP 0006), select
2201-14 Code Active - Repeat trou-
Trans/chassis 120M and verify
bleshooting code from the beginning.
2201-14 is not active.
2201-14 Code Not Active - Trouble-
shooting complete.
0020-115
