TM 5-3805-293-23-2
0020
Table 1. Transmission Code (2113-03 TO 2304-06) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2176-05 Secondary Steer
2. Using digital multimeter, test for
Resistance Less Than 5.0 Ohms -
Right Solenoid Current
continuity between front attach-
Cab lower wiring harness is open,
Below Normal - Continued
ment wiring harness connector U-
replace cab lower wiring harness (WP
C36 (WP 0009, Figure 188) termi-
0266).
nal 4 and terminal 5. Resistance
Remove jumper wire from front
should be less than 5.0 Ohms.
attachment wiring harness connector
U-C40 (WP 0009, Figure 190)) termi-
nal 1 and terminal 2.
Connect the rear chassis wiring har-
ness connector FA-C20 (WP 0009,
Figure 113) to transmission ECM J1
(WP 0009, Figure 112).
Connect the front attachment wiring
harness connector U-C40 (WP 0009,
Figure 190)) to secondary steering
right solenoid (WP 0009, Figure 191)
(WP 0216).
Proceed to step 3.
Resistance 5.0 Ohms or Greater -
Front attachment wiring harness is
open, replace front attachment wiring
harness (WP 0180).
Connect the rear chassis wiring har-
ness connector FA-C22 (WP 0009,
Figure 47) to cab lower wiring harness
connector P-C69 (WP 0009, Figure
46) (WP 0266).
Connect the rear chassis wiring har-
ness connector FA-C20 (WP 0009,
Figure 113) to transmission ECM J1
(WP 0009, Figure 112).
Proceed to step 3.
3. Using the MSD (WP 0006), select
2176-05 Code Active - Repeat trou-
Trans/chassis 120M and verify
bleshooting code from the beginning.
2176-05 is not active.
2176-05 Code Not Active - Trouble-
shooting complete.
0020-27