TM 5-3805-293-23-1
0017
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0596-09 Implement Control
4. Using digital multimeter, test for
Continuity - Proceed to step 5.
Module Abnormal Update
continuity between harness con-
No Continuity - Replace rear chassis
Rate - Continued
nector FA-C22 (WP 0009, Figure
wiring harness (WP 0266).
47) terminal 67 and machine
Connect harness connector P-C39
ground.
(WP 0009, Figure 70) to implement 1
Resistance should be less than
ECM J2 (WP 0009, Figure 69).
5.0 ohms.
Connect cab lower wiring harness
connector P-C41 (WP 0009, Figure
68) to Implement 1 ECM J1 (WP
0009, Figure 69).
Proceed to step 15.
5. Using digital multimeter, test for
Resistance 5.0 Ohms or Less - Pro-
continuity between harness con-
ceed to step 6.
nector FA-C22 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
47) terminal 68 and machine
Replace rear chassis wiring harness
ground.
(WP 0266).
Resistance should be less than
Connect harness connector P-C39
5.0 ohms.
(WP 0009, Figure 70) to implement 1
ECM J2 (WP 0009, Figure 69).
Connect cab lower wiring harness
connector P-C41 (WP 0009, Figure
68) to Implement 1 ECM J1 (WP
0009, Figure 69).
Proceed to step 15.
6. Connect harness connector FA-
C22 (WP 0009, Figure 47) to har-
ness connector P-C69 (WP 0009,
Figure 46) (WP 0266).
7. Using digital multimeter, test for
Resistance 5.0 Ohms or Less - Pro-
continuity between harness con-
ceed to step 8.
nector P-C41 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
68) terminal 13 and machine
Replace cab lower wiring harness
ground.
(WP 0266).
Resistance should be less than
Proceed to step 15.
5.0 ohms.
8. Using digital multimeter, test for
Continuity - Proceed to step 9.
continuity between harness con-
No Continuity - Replace cab lower
nector P-C41 (WP 0009, Figure
wiring harness (WP 0266).
68) terminal 23 and machine
Proceed to step 15.
ground.
There should be no continuity.
0017-22
