TM 5-3805-293-23-1
0016
Table 1. Transmission Code (0041-03 to 0444-06) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0177-03 Transmission Oil
9. Using digital multimeter, test for
No Continuity or Resistance More
Temperature Sensor Volt-
continuity between harness con-
Than 5.0 Ohms - Replace rear chas-
age Above Normal - Contin-
nector FA-C20 (WP 0009, Figure
sis wiring harness (WP 0188).
ued
113) terminal 22 and machine
Connect harness connector T-C13
ground.
(WP 0009, Figure 131) to transmis-
Resistance should be less than 5.0
sion oil temperature sensor (WP
ohms.
0009, Figure 132) (WP 0151).
Proceed to step 10.
Continuity - Replace transmission
wiring harness (WP 0158).
Proceed to step 10.
10. Using the MSD (WP 0006), select
0177-03 Code Remains Active -
Trans/Chassis 120M and verify
Repeat troubleshooting from the
0177-03 is not active.
beginning of this diagnostic code.
0177-03 Code Not Active - Trouble-
shooting complete.
Test Step 3. Test Ground Circuit.
1. Disconnect rear chassis harness
connector FA-C28 (WP 0009, Fig-
ure 129) from transmission wiring
harness connector T-C1 (WP
0009, Figure 130) (WP 0158).
2. Install a jumper wire between har-
ness connector FA-C28 (WP
0009, Figure 129) terminal 2 and
terminal 3.
3. Using digital multimeter, test for
No Continuity or Resistance More
continuity between harness con-
Than 5.0 Ohms - Verify rear frame
nector FA-C20 (WP 0009, Figure
ground (WP 0009, Figure 133) is
113) terminal 22 and machine
clean and tight. If rear frame ground is
ground.
OK, replace rear chassis wiring har-
Resistance should be less than 5.0
ness (WP 0188).
ohms.
Connect harness connector T-C13
(WP 0009, Figure 131) to transmis-
sion oil temperature sensor (WP
0009, Figure 132) (WP 0151).
Proceed to step 4.
Continuity - Replace transmission
wiring harness (WP 0158).
Proceed to step 4.
4. Using the MSD (WP 0006), select
0177-03 Code Remains Active -
Repeat troubleshooting from the
Trans/Chassis 120M and verify
beginning of this diagnostic code.
0177-03 is not active.
0177-03 Code Not Active - Trouble-
shooting complete.
0016-40