TM 5-3805-293-23-1
0016
Table 1. Transmission Code (0041-03 to 0444-06) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0144-05 Backup Alarm Relay
8. Using digital multimeter, test for
Continuity - Proceed to step 9.
Current Below Normal -
continuity between harness con-
No Continuity - Replace rear chassis
Continued
nector FA-C21 (WP 0009, Figure
wiring harness (WP 0188).
124) terminal 5 and backup relay
Proceed to step 10.
harness connector FA-C33 (WP
0009, Figure 141) terminal 5.
Resistance should be less than 5.0
ohms.
9. Using digital multimeter, test for
Continuity - Replace transmission
continuity between harness con-
ECM (WP 0137).
nector FA-C21 (WP 0009, Figure
Connect backup relay harness con-
124) terminal 4 and backup relay
nector FA-C33 (WP 0009, Figure 141)
harness connector FA-C33 (WP
to backup alarm relay (WP 0009, Fig-
0009, Figure 141) terminal 2.
ure 142) (WP 0188).
Resistance should be less than 5.0
Proceed to step 10.
ohms.
No Continuity - Replace rear chassis
wiring harness (WP 0188).
Proceed to step 10.
10. Using MSD (WP 0006), select
0144-05 Code Active - Repeat trou-
Trans/Chassis 120M ECM and
bleshooting code from the beginning.
verify 0144-05 is active.
0144-05 Code Not Active - Trouble-
shooting complete.
0016-28