TM 5-3805-293-23-1
0016
Table 1. Transmission Code (0041-03 to 0444-06) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0070-03 Parking Brake
17. Using MSD (WP 0006), select
0070-03 Code Active - Repeat trou-
Switch Voltage Above Nor-
Trans/Chassis 120M ECM and
bleshooting code from the beginning.
mal - Continued
verify 0070-03 is active.
0070-03 Code Not Active - Trouble-
shooting complete.
Test Step 2. Test Parking Brake
Switch OFF Circuit.
1. Connect harness connector PF-
C6 (WP 0009, Figure 201) to
parking brake switch (WP 0276).
N OT E
Harness connector is located behind cab bulkhead cover on right rear
of cab.
2. Remove rear bulkhead cover
plate (WP 0266).
3. Disconnect harness connector
FA-C22 (WP 0009, Figure 47)
from harness connector P-C69
(WP 0009, Figure 46).
4. Using digital multimeter, test for
Continuity - Replace rear chassis
continuity between harness con-
wiring harness (WP 0188).
nector P-C69 (WP 0009, Figure
Proceed to step 7.
46) terminal 53 and machine
No Continuity - Proceed to step 5.
ground.
Resistance should be less than 5.0
Ohms.
5. Disconnect lower cab wire har-
ness connector P-C4 (WP 0009,
Figure 44) from instrument panel
harness connector PF-C1 (WP
0009, Figure 45) (WP 0276).
0016-12