TM 5-3805-293-23-1
0015
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 2. Test for Open Left
2319-02 Left Front Drive
Motor Speed Harness.
Motor Speed Sensor #1
Data Erratic, Intermittent or
1. Turn ignition switch and battery
Incorrect - Continued
disconnect switch to the OFF
position.
2. Remove jumper wire from AK-C2
terminal 1 and terminal 2 (WP
0009, Figure 59).
3. Remove nose front frame cover
from machine (WP 0224).
4. Disconnect clutch drive solenoid
AF-C2 harness connector (WP
0009, Figure 63) from left motor
speed AK-C1 harness connector
(WP 0009, Figure 64).
5. Connect jumper wire between
AF-C2 terminal 1 and AF-C2 ter-
minal 2 (WP 0009, Figure 63).
6. Turn battery disconnect switch
and ignition switch to the ON
position.
7. Check for Active code 0041-04 in
Code 0041-04 Does Not Become
All Wheel Drive 120M ECM (WP
Active - Proceed to Test Step 3.
Code 0041-04 Becomes Active -
Remove jumper wire from AF-C2 ter-
minal 1 and terminal 2 (WP 0009,
Figure 63).
Replace left motor speed harness
(WP 0202).
Proceed to step 8.
8. Perform Speed Sensor Test (WP
Motor Speeds Not OK, 2319-02
0023) and verify motors speeds
Code Active - Repeat
are 920 50 rpm in forward and -
troubleshooting code from the
920 50 rpm in reverse.
beginning.
Motor Speeds OK and 2319-02
Code Not Active - Troubleshooting
complete.
0015-3
