TM 5-3805-293-23-1
0014
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2296-05 Left Front Drive
8. Using the MSD (WP 0006), select
2296-05 Code Active - Repeat trou-
Pump Reverse Control Sole-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
noid Current Below Normal -
2296-05 is not active.
2296-05 Code Not Active - Trouble-
Continued
shooting complete.
Test Step 4. Test for Open Rear
Chassis Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to the OFF
position.
2. Remove jumper wire from FA-C37
terminal 2 and terminal 3 (WP
0009, Figure 79).
3. Disconnect rear chassis wiring
FA-C23 harness connector (WP
0009, Figure 17) from cab lower
wiring P-C71 harness connector
(WP 0009, Figure 18) (WP 0188).
4. Disconnect rear chassis wiring
FA-C22 harness connector (WP
0009, Figure 47) from cab lower
wiring P-C69 harness connector
(WP 0009, Figure 46) (WP 0188).
5. Connect jumper wire between P-
C69 terminal 70 (WP 0009, Figure
46) and P-C71 terminal 12 (WP
0009, Figure 18).
6. Turn battery disconnect switch
and ignition switch to the ON posi-
tion.
0014-58