TM 5-3805-293-23-1
0014
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2296-05 Left Front Drive
6. Check for Active code 2296-05 or
Code 2296-05 Remains Active - Pro-
Pump Reverse Control Sole-
2296-06 in All Wheel Drive 120M
ceed to Test Step 2.
noid Current Below Normal -
ECM (WP 0006).
Code 2296-05 Becomes Inactive
Continued
and 2296-06 Becomes Active -
Remove jumper wire from AX-C3 ter-
minal 1 and terminal 2 (WP 0009, Fig-
ure 104).
Replace left drive pump reverse sole-
noid (WP 0117).
Proceed to step 7.
7. Using the MSD (WP 0006), select
2296-05 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2296-05 is not active.
2296-05 Code Not Active - Trouble-
shooting complete.
Test Step 2. Test for Open Pump
Drive Solenoid Harness.
1. Turn ignition switch and battery
disconnect switch to the OFF
position.
2. Remove jumper wire from AX-C3
terminal 1 and terminal 2 (WP
0009, Figure 104).
3. Disconnect filter bypass, pump
drive solenoid AX-C1 harness
connector (WP 0009, Figure 100)
from pump drive solenoid AC-C1
harness connector (WP 0009,
Figure 101).
4. Connect jumper wire between
AX-C1 terminal 2 and AX-C1 ter-
minal 3 (WP 0009, Figure 100).
5. Turn battery disconnect switch
and ignition switch to the ON posi-
tion.
6. Check for Active code 2296-05 or
Code 2296-05 Remains Active - Pro-
2296-06 in All Wheel Drive 120M
ceed to Test Step 3.
ECM (WP 0006).
Code 2296-05 Becomes Inactive
and 2296-06 Becomes Active -
Remove jumper wire from AX-C1 ter-
minal 2 and terminal 3 (WP 0009, Fig-
ure 100).
Replace pump drive solenoid har-
ness (WP 0201).
Proceed to step 7.
0014-56
