TM 5-3805-293-23-1
0014
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2293-05 Left Front Drive
3. Remove nose front frame cover
Motor Solenoid Current
from machine (WP 0224).
Below Normal - Continued
4. Disconnect clutch drive solenoid
AF-C4 harness connector (WP
0009, Figure 96) from left front
drive motor solenoid (WP 0009,
Figure 97).
5. Connect jumper wire between AF-
C4 terminal 1 and AF-C4 terminal
2 (WP 0009, Figure 96).
6. Turn battery disconnect switch
and ignition switch to the ON posi-
tion.
7. Check for Active code 2293-05 or
Code 2293-05 Remains Active - Pro-
2293-06 in All Wheel Drive 120M
ceed to Test Step 2.
ECM (WP 0006).
Code 2293-05 Becomes Inactive
and 2293-06 Becomes Active -
Remove jumper wire from AF-C4 ter-
minal 1 and terminal 2 (WP 0009, Fig-
ure 96).
Replace left front drive motor solenoid
(WP 0248).
Proceed to step 8.
8. Using the MSD (WP 0006), select
2293-05 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2293-05 is not active.
2293-05 Code Not Active - Trouble-
shooting complete.
Test Step 2. Test for Open Clutch
Drive Solenoid Harness.
1. Turn ignition switch and battery
disconnect switch to the OFF
position.
2. Remove jumper wire from AF-C4
terminal 1 and terminal 2 (WP
0009, Figure 96).
3. Remove rear front frame cover
from machine (WP 0224).
4. Disconnect clutch drive solenoid
AF-C3 harness connector (WP
0009, Figure 51) from cab lower
wiring P-C34 harness connector
(WP 0009, Figure 52) (WP 0200).
5. Connect jumper wire between P-
C34 terminal 1 and P-C34 termi-
nal 13 (WP 0009, Figure 52).
0014-5
