TM 5-3805-293-23-1
0011
Table 2. Engine Troubleshooting with Codes for the 120M Motor Grader - Continued.
CDI FMI CODE
ERROR/EVENT
CORRECTIVE ACTION
0041-04 8 Volt DC Supply
18. Using a digital multimeter, test for
Continuity - Rear chassis wiring
Voltage Below Normal -
continuity between FA-C17 (WP
harness is shorted, replace rear
Continued
0009, Figure 14) terminal 43 and
chassis wiring harness (WP 0189).
all other terminals on FA-C17, and
Connect P-C23 (WP 0009, Figure 13)
ground. There should be no conti-
harness connector to throttle position
nuity.
sensor.
Install pedal assembly cover (WP
0288).
Connect EA-C4 (WP 0009, Figure 11)
harness connector to engine speed
sensor.
Connect EA-C3 (WP 0009, Figure 12)
harness connector to secondary
engine speed sensor.
Connect Engine ECM harness con-
nector EA-C1 (WP 0009, Figure 3) to
Engine ECM J2.
No Continuity - Proceed to step 19.
Change 1
0011-72
