4
TM 5-3805-293-10
OPERATOR MAINTENANCE
-
SCARIFIER TOOTH AND SHANK MAINTENANCE
0027
Inspection, Replacement
INITIAL SETUP
Equipment Condition
Tools and Special Tools
0
0
Hammer (WP 0031, Item 6)
Scarifier lowered onto 4-6 in. (100-150 mm)
0
wood blocks (WP 0005)
Tooth Removing Tool, Scarifier (WP 0031,
0
Machine parked (WP 0005)
Item 16)
0
0
Material/Parts
Estimated Time to Complete
0
0
Goggles, Industrial (WP 0032, Item 10)
0.4 Hr
0
0
INSPECTION
00027
1. Visually inspect scarifier teeth (Figure 1, Item 2) for excessive wear. Replace tooth when worn to dashed line
(Figure 1, Item 3) shown in illustration.
2. Visually inspect shanks (Figure 1, Item 1) for cracks or breakage.
3. Proceed to Replacement in this work package if teeth or shanks require replacement.
Figure 1. Scarifier Tooth and Shank Inspection.
0027
END OF TASK
0027-1
