ENGINE
TM 5-3805-263-14&P-2
REMOVE HOOD
1.
2.
HOOD
Loosen clamp (3) from precleaner assembly
(2). Loosen hose clamp (4). Remove hose (1)
from tube assembly. Remove the precleaner
assembly (2).
Fasten a hoist to the hood (6) and loosen the
fasteners (5) on each corner of the hood. Re-
move hood (6). Weight of hood is 90 lb. (41
kg).
INSTALL HOOD
1. Fasten a hoist to the hood and put hood (1) in
position.
2. Use four fasteners (2) to hold hood in position.
3. Install precleaner assembly (3) and tighten
clamp (5).
4. Install hose (4) on the tube assembly.
DISASSEMBLY AND ASSEMBLY
1-84
