3304 VEHICULAR ENGINES
SPECIFICATIONS
TM 5-3805-263-14&P-2
CYLINDER HEAD
Thickness of cylinder head
(new)
3.938 ± .030 in. (100.03 ± 0.76 mm)
NOTE: Dimension from top of closed valve to face of cylinder head
must be according lo the specifications in VALVES.
Put anti-seize compound on threads and tighten bolts in the Step se-
quence that follows:
Step 1. Tighten all bolts in number
sequence to ............................ 115 lb. ft. (155 N·m)
Step 2. Again tighten all bolts in number
sequence to
185 ± 13 lb. ft. (250 ± 17 N·m)
. . . . . . . . .
Step 3. Again tighten all bolls in number
sequence to
185 ± 13 lb. ft. (250 ± 17 N·m)
Step 4. Tighten all bolts in letter sequence
(hand torque only) to
32 ± 5 lb. ft. (43 ± 7 N·m)
TIGHTENING SEQUENCE
VALVE MECHANISM COVER GROUP
8N4446
Put 5H2471 Cement on the face of valve cover and top side of gasket.
Tighten bolts by number sequence
shown to .............................
98 ± 27 lb. in. (11 ± 3 N·m)
1-232
