ENGINE
CYLINDER HEAD
DISASSEMBLY AND ASSEMBLY
TM 5-3805-263-14&P-2
REMOVE CYLINDER HEAD
start by:
a) remove muffler
b) remove air cleaner housing
c) remove fuel priming and primary filter
pump group
d) remove rocker arm and push rods
e) remove exhaust manifold
f) remove water regulator
g) remove fan drive
1. Disconnect tube (1) from elbow (2).
2. Remove the bolts and elbow (2) from the cylin-
der head.
3. Loosen the clamp and disconnect hose (3) from
water pump elbow (4).
4. Loosen clamps (5). Remove the bolts, water
pump elbow (4) and gasket from the water
pump.
5. Remove the bolt and disconnect clamp (7) from
the cylinder head.
6. Remove tube assemblies (6) and (8) from the
engine.
7. Remove the bolt and disconnect clip (10) from
the cylinder head.
8. Remove the bolt from the lifting bracket and
disconnect wire harness (9). Install the bolt on
the lifting bracket.
1-171
