ENGINE
DISASSEMBLY AND ASSEMBLY
TM 5-3805-263-14&P-2
FUEL INJECTION PUMP HOUSING AND GOVERNOR
REMOVE FUEL INJECTION PUMP HOUSING
AND GOVERNOR
start by:
a) remove fuel lines
b) remove fuel filter base and filter
1. Remove nuts (2) and cover (1) from the timing
gear cover.
2. Loosen bolt (3). Leave a gap of 3.2 mm (.125
in.) between the washer and the gear.
3. Use tool (A) to remove gear (4).
4. Remove the nut and disconnect cable assembly
(5) from the governor control lever.
5. Remove the bolts and disconnect bracket as-
sembly (6) from the governor.
6. Disconnect pressure line (7) at the fuel ratio
control.
7. Put a mark on wires (9) and disconnect them
from the fuel shutoff solenoid.
8. Disconnect wires (8) from the alternator.
1-132
