ENGINE
DISASSEMBLY AND ASSEMBLY
TM 5-3805-263-14&P-2
FUEL FILTER BASE AND FILTER
REMOVE FUEL FILTER BASE AND
FILTER
NOTE: The fuel filter can be removed from the base
with tool (A).
1. Remove tube assembly (1) from the fuel filter
base.
2. Put identification on wires (2) and disconnect
them from the sending unit.
3. Remove bolts (4) and fuel filter base (3) and
the filter as a unit from the engine.
INSTALL FUEL FILTER BASE AND
FILTER
1. If necessary, make a replacement of the fuel
filter gasket.
2. Put the fuel filter base (1), the filter and the
gasket in position on the fuel injection pump
housing. Install the bolts that hold it.
3. Connect wires (3) to the sending u nit.
4. Install tube assembly (2) on the fuel filter base.
1-129
