ENGINE
DISASSEMBLY AND ASSEMBLY
TM 5-3805-263-14&P-2
RADIATOR AND GUARD
6. Put tube (8) in position on the machine. Slide
the hose (6) over the tube on each end. Tighten
clamps (9) on the hoses. Install the bolt that
holds clip (7) to the fuel tank.
7. Put tube assembly (10) in position, and install
the bolts that hold the clips in place.
8. Install the wiring harness (11) to the horn and
lights. Install the bolts (12) in the clips in the
radiator guard.
9. Connect two oil lines (13) to the hydraulic oil
cooler. Install four clips (14) and bolts on the
oil lines.
1-118