TM 5-3805-263-14&P-1
8.
Cut a flat bottom. Set the right lift cylinder to the
required depth.
9.
Set the left lift cylinder as required.
10.
Move the centershift lock pin to the position shown.
Move the centershift lock pin lever to the INDEX and
RUN position.
11.
Start the right front tire in the bottom of the first "V"
ditch.
12.
Set the right end of the blade at the bottom of the
backslope.
13.
Lower the right lift cylinder so the point of the blade
is on the established grade of ditch
74
