TM 5-3805-263-14&P-1
Operating Techniques
Left Hand Shoulder Cleanup
Be sure to ground the moldboard before retracting
the-centershift lock pin.
1.
Move the centershift lock pin to the position shown.
Move the centershift lock pin lever to the INDEX and
RUN position.
2.
Set the blade so the left end is in line with the outside
edge of the left front tire. The material must be delivered
between the wheels.
3.
Lower the lift cylinders until the blade is horizontal
and at the desired depth of the cut.
4.
Lean the front wheels slightly to the right.
69
