TM 53805-263-14&P-3
DISASSEMBLY AND ASSEMBLY
SCARIFIER TEETH AND SHANKS
SCARIFIER BLOCK
REMOVE SCARIFIER TEETH AND SHANKS
Tools Needed
A
6B3260 Tooth Removing
1
1.
Drive the teeth (1) off the shanks (2) with the tooth
removing tool (A).
2.
Pull out the locking pin (3) for each shank from the
top of the scarifier block (4).
NOTE: Tooth removal tool can be utilized as a pry- bar.
3.
Remove the shanks (2).
INSTALL SCARIFIER TEETH AND SHANKS
1.
Drive teeth (1) on shanks (2).
2.
Insert shanks (2) in scarifier block (4).
3.
Insert locking pins (3) to secure shanks (2) in
scarifier block (4).
REMOVE SCARIFIER BLOCK
1. Place supports (1) under scarifier block assembly
(2). Hydraulically lower scarifier block assembly (2)
onto supports.
2.
Remove 4 nuts, washers and bolts that attach the
drawbar assemblies (4) and (5) to the plates (3) on
each side of the scarifier block assembly (2).
3.
Using a forklift truck, remove scarifier block
assembly (2) from under the front frame.
NOTE: Weight of scarifier block assembly is 434 lbs.
(197 kg).
3-282
