DISASSEMBLY AND ASSEMBLY
TM 5-3805-263-14&P-3
BRAKE CONTROL VALVE
5. Put screw (15) in valve assembly. Install spring
(16), diaphragm (17), piston assembly (18)
spring (19), retainer (20) and nut (21) on screw.
6. Install a new O-ring seal on seat (23). Put spring
(24) and seat (23) in position on valve (25).
Install snap ring (22) in position with tool (C).
7. Install exhaust valve assembly (27) and cover
(26) in position on valve body.
8. Install pressure indicator switches (29) and stop
light switch (28) in position on valve body. end
by:
a) install brake control sleeve.
3-262
