VEHICLE SYSTEMS
TM 5-3805-263-14&P-3
PARKING BRAKE RELEASE VALVE,
DIFFERENTIAL LOCK ACTUATOR VALVE
DISASSEMBLE PARKING BRAKE RELEASE VALVE
1. Put diaphragm (2), seat (3), and spring (5)
position in body (1).
2. Install a new seal on cover (4). Install cover (4
on body (1).
end by:
a) install parking brake release valve
ASSEMBLE PARKING BRAKE RELEASE VALVE
start by:
a) remove parking brake release valve
1. Remove cover (5) from body (3).
2. Remove the seal from cover (5).
3. Remove spring (2), seat (4), and diaphragm (1)
from the body.
REMOVE DIFFERENTIAL LOCK ACTUATOR VALVE
start by:
a) remove parking brake rotochamber ant
release valve
NOTE
The differential lock actuator valve is
locate( on the differential carrier
under the engine.
1. Disconnect air line (3) from union (4). Remove
bolts (1) and the clip.
2. Remove differential lock actuator valve (2).
TYPICAL EXAMPLE
INSTALL DIFFERENTIAL LOCK ACTUATOR VALVE
1. Put differential lock actuator valve (3) in position
on the differential carrier. Install the clip and
bolts (2) that hold the valve to the carrier.
2. Connect air line (1) to the union on the actuator
valve.
end by:
a) install parking brake rotochamber and
release valve
TYPICAL EXAMPLE
3-265
