TM 5-3805-263-14&P-3
DISASSEMBLY AND ASSEMBLY
HYDRAULIC PUMP
DISASSEMBLE HYDRAULIC PUMP
start by:
a) remove hydraulic pump
1. Thoroughly clean the outside of the pump. Drain
the oil from the pump.
2. Loosen nut (2) on shaft and install tooling (A).
After the yoke (I) is loosened from the shaft, remove nut,
tooling (A) and yoke.
3. Remove two bolts (3) and cooler pump (4) from
the hydraulic pump.
3-238
