TM 5-3805-263-14&P-3
DISASSEMBLY AND ASSEMBLY
PUMP DRIVE
REMOVE PUMP DRIVE
1. Remove bolts (1) and (3) from each side of guards
(2). Remove guards (2).
2. Remove bolts (6) that hold the pump drive to the
yoke on the hydraulic pump.
3. Remove bolts (5) that hold the pump drive to the
yoke on the engine.
4. Remove pump drive (4).
INSTALL PUMP DRIVE
1. Put pump drive (1) in position between the yoke on
the hydraulic pump and the yoke on the engine.
2. Install the bolts that hold the pump drive to the
hydraulic pump. Tighten the bolts to a torque of 41
5 Ib. ft. (55 7 Nm).
3. Install the bolts that hold the pump drive to the
engine. Tighten the bolts to a torque of 41 5 lb. ft.
(55 7 Nm).
4. Put guards (3) in position over the pump drive and
on the frame. Install bolts (4) that hold the guards
to the frame. Install bolts (2) that hold the guards
to each other.
3-234
