TM 5-3805-263-14&P-3
VEHICLE SYSTEMS
HYDRAULIC PUMP
REMOVE HYDRAULIC PUMP
start by:
a) remove pump drive
1. Install anti-pivot pin (1) in machine as shown in
photo.
2. Drain hydraulic tank.
3.
Disconnect hydraulic lines (4) and (5) from the oil
cooler pump. Disconnect lines (2) and (3).
4. Disconnect tube (6) and hydraulic line (7) from
pump.
5. Disconnect line (9) from hydraulic tank and remove
line (8) from vehicle.
6. Remove mounting bolts (10) from plate assembly
(11).
3-235
