TM 5-3805-261-34
TRANSMISSION MAINTENANCE. (cont)
14-5.
Transmission Hydraulic Control Valve. (Sheet 3 of 4)
REMOVAL (cont)
10.
Remove four bolts (23) and
washers (24, Figure 14-76) from
transmission case.
11.
Remove hydraulic control group
(25).
12.
Remove lifting eye, control
bracket, lifting bracket and
ratchet assembly.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
INSTALLATION
1.
Attach lifting eye, control
bracket, lifting bracket and
ratchet assembly to transmission
case and hydraulic control group
(25).
2.
Using tooling, position hydraulic
control group (25, Figure 14-76)
and attach to transmission case.
3.
Install four washers (24) and
bolts (23). Tighten four bolts
(23) to 32 to 38 ft-lb torque.
4.
Remove lifting eye, control
bracket, lifting bracket and
ratchet assembly.
Go to Sheet 4
Figure 14-76.
14-50