TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
14-4.
Transmission Assembly: Planetary Group, Disassembly/Assembly. (Sheet 17
of 19)
ASSEMBLY
35.
Install press assembly and
compress to install gear (30),
snap ring (29) and seal ring
(28.1, Figure 14-47).
36.
Install two dowels (31) in
housing (43).
37.
Release pressure of the press
assembly slowly and remove press
assembly.
38.
Install five discs (27) and four
plates (28, Figure 14-46).
39.
Install two long bolts into hub
(26) to aid in installing hub
(26) using care not to damage
seal.
40.
Install hub (26).
41.
Install four alining pins (25),
five balls (24) and inserts (23,
Figure 14-45).
42.
Install piston (22), gear (21),
four discs (19) and three plates
(20).
Go to Sheet 18
Figure 14-47.
Figure 14-46.
Figure 14-45.
14-45