TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
14-5.
Transmission Hydraulic Control Valve. (Sheet 4 of 4)
INSTALLATION
5.
Install two new preformed
packings (22 and 21) in sleeves
(20 and 19, Figure 14-75).
6.
Install sleeves (20 and 19) to
transmission case.
7.
Install two new preformed
packings (18 and 17) in sleeves
(16 and 15).
8.
Install sleeves (16 and 15) to
transmission case.
9.
Install plate (14) and two bolts
(13). Tighten two bolts (13) to
19 to 25 ft-lb torque.
10.
Install plate (12) and bolt (11).
Tighten bolt (11) to 19 to 25
ft-lb torque.
11.
Install links (10 and 9, Figure
14-74).
12.
Install new gasket (8), cover
(7), washer (6), lockwasher (5),
bolt (4), 18 washers (3), lock-
washers (2) and bolts (1).
NOTE
Return 130G Grader to
original equipment condition.
End of Task
Figure 14-74.
Figure 14-75.
14-51
