TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
14-4.
Transmission Assembly: Planetary Group, Disassembly/Assembly. (Sheet 7
of 19)
DISASSEMBLY
36.
Using punch and hammer, position
three pins (71) and drive into
shafts (72, Figure 14-59).
37.
Remove three shafts (72), discs
(73), gears (74), rollers (75)
and discs (76) from carrier (70).
NOTE
Remove pins and plugs only if
inspection indicates replace-
ment is necessary.
38.
Remove three pins (71) and plugs
(77), if necessary, from shafts
(72).
39.
Remove two discs (78), one plate
(79), five dowels (80), housing
(81) and ten springs (82, Figure
14-60).
40.
Remove items 83 thru 85 as an
assembly.
41.
Remove rings (83 and 84) from
piston (85, Figure 14-61).
42.
Remove two discs (86), one plate
(87) and ring (88, Figure 14-62).
43.
Remove items 89 and 90 as an
assembly.
Go to Sheet 8
Figure 14-59.
Figure 14-60.
Figure 14-62.
Figure 14-61.
14-35
