TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
14-4.
Transmission Assembly: Planetary Group, Disassembly/Assembly. (Sheet 5
of 19)
DISASSEMBLY
20.
Using punch and hammer, position
three pins (34) and drive into
shafts (35, Figure 14-50).
21.
Remove three shafts (35), discs
(36), gears (37), rollers (38)
and discs (39) from carrier (41).
NOTE
Remove pins and plugs only if
inspection indicates replace-
ment is necessary.
22.
Remove three pins (34) and plugs
(40), if necessary, from shafts
(35).
23.
Remove five inserts (42), housing
(43), ten springs (44) and gear
(45, Figure 14-51).
24.
Remove four discs (46) and three
plates (47).
25.
Remove items 48 thru 50 as an
assembly (Figure 14-52).
26.
Remove two dowels (51), housing
(52) and ten springs (53).
27.
Remove rings (48 and 49) from
piston (50, Figure 14-53).
Go to Sheet 6
Figure 14-50.
Figure 14-51.
Figure 14-53.
Figure 14-52.
14-33
