TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
14-4.
Transmission Assembly: Planetary Group, Disassembly/Assembly. (Sheet 11
of 19)
ASSEMBLY
1.
Install six studs (125), new
preformed packing (124), sleeve
bearing (123), ring carrier (122)
and seal ring (121) in cage (136,
Figure 14-71). Use drive plates
and handle to install sleeve
bearing (123).
2.
Install roller bearing cup (120),
cone spacer (119) and roller
bearing (118) into gear (127).
3.
Install items 127 thru 118 as an
assembly and ring (117, Figure
14-70).
4.
Install roller bearing cup (116),
roller bearing (115) and lock nut
(114).
5.
Using spanner socket, install
bearing lock nut (113). Apply
anti-seize compound on threads of
bearing lock nut (113) and
tighten to 170 ft-lb torque and
bend tab of lock nut (114) into
slot.
Figure 14-71.
Figure 14-70.
14-39