TM 5-380-261-34
TRANSMISSION MAINTENANCE.
14-3.
Planetary Group. (Sheet 5 of 6)
INSTALLATION
1.
Install two 5/8-11NC eyebolts in
planetary housing (25, Figure
14-38).
2.
Install hoist and sling on two
5/8-11NC eyebolts and lift
planetary housing (25).
Be sure that the parking
brake lever enters the notch
in the housing when the
transmission is put into
position in the transmission
case.
3.
Install planetary housing (25)
into transmission case being sure
parking brake lever on planetary
housing (25) enters notch in
transmission case.
4.
Remove two 5/8-11NC eyebolts and
hoist and sling.
5.
Install two bolts (24) and new
preformed packings (23, 22 and
21, Figure 14-37) in planetary
housing (25) of transmission
case.
6.
Install two 1/2-13NC eyebolts and
nuts on output flange in trans-
mission.
7.
Install hoist and sling to two
1/2-13NC eyebolts, turn trans-
mission to side and lift and
place transmission on trans-
mission stand (Figure 14-36).
8.
Install transmission stand
mounting bolts to transmission.
9.
Remove hoist and sling, two
1/2-13NC eyebolts and nuts.
Go to Sheet 6
CAUTION
Figure 14-37.
Figure 14-36.
14-27
