TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
10-13.
Power Blade and Blade Tip Check and Relief Valve. (Sheet 3 of 5)
DISASSEMBLY
6
. Remove two springs (5) and balls
(6,Figure 10-113).
7.
Using alignment punch and hammer,
remove seat (7) and piston (8)
from body (17).
8
. Using alignment punch and hammer,
remove seat (9) from body (17).
WARNING
Spring is under pressure.
Loosen plug carefully to keep
spring from becoming a
projectile.
9.
Remove items 10 thru 12 as an
assembly.
10.
Remove and discard preformed
packings (11 and 12) from plug
(10, Figure 10-114).
11.
Remove valve (13), shim(s) (14),
spring (15) and washer (16,
Figure 10-113). Tie shim(s) (14)
together and tag for
identification.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
Figure 10-113.
Figure 10-114.
Go to Sheet 4
10-77