TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
10-13.
Power Blade and Blade Tip Check and Relief Valve. (Sheet 5 of 5)
ASSEMBLY
8.
Install two balls (6) and springs
(5).
9.
Install two new preformed
packings (4) on plugs (3, Figure
10-112).
10.
Install items 4 and 3 as an
assembly (Figure 10-111).
Tighten two plugs (3) to 25 ft-lb
torque.
11.
Install two new preformed
packings (2) on adapters (1,
Figure 10-110).
12.
Install two items 2 and 1 as an
assembly (Figure 10-109).
Tighten two adapters (1) to 55
ft-lb torque.
NOTE
Return 13OG Grader to
original equipment condition.
Figure 10-112.
Figure 10-111.
Figure 10-110.
Figure 10-109.
End of Task
10-79
