TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE. (cont)
10-11.
Hydraulic Pump Relief Valve. (Sheet 3 of 4)
DISASSEMBLY (cont)
8.
Remove preformed packing (12)
from plug (13, Figure 10-103).
Discard preformed packing (12).
WARNING
COMPRESSED SPRINGS
Always wear safety glasses
when removing or installing
parts restraining compressed
springs. Remove restraining
parts slowly to relieve
spring pressure. INJURY may
result if you do not follow
this procedure. If you are
injured while removing or
installing compressed
springs, obtain medical aid
immediately.
9.
Remove retainer (14) and spring
(15) from valve (16, Figure
10-104).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
ASSEMBLY
1
Install spring (15) and retainer
(14) on valve (16, Figure
10-104).
2.
Install new preformed packing
12) on plug (13, Figure 10-103).
Figure 10-103.
Figure 10-104.
Go to Sheet 4
10-70
