TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE. (cont)
10-4.
Pump Assembly. (Sheet 4 of 23)
DISASSEMBLY (cont)
7.
Remove drive gear (10), idler
gear (11) and two dowels (12)
from body (13, Figure 10-16).
8.
Remove diaphragm (14) from front
plate (21, Figure 10-17).
9.
Remove two springs (15) and balls
(16, Figure 10-18).
10.
Remove and discard gaskets (17
and 18) and seal (19). Remove
all gasket material from mounting
surfaces.
11.
Using a suitable puller, remove
and discard seal (20) from front
plate (21).
12.
Remove bolt (22), two bolts (23),
lockwashers (24) and items 25
thru 52 as an assembly from head
(95, Figure 10-19).
13.
Remove and discard preformed
packings (25 thru 27) from
housing (47, Figure 10-20).
14.
Remove plug (28), preformed
packing (29), plug (30) and
preformed packing (31). Discard
preformed packings (29 and 31).
Go to Sheet 5
10-18
Figure 10-20.
Figure 10-19.
Figure 10-18.
Figure 10-17.
Figure 10-16.
