TM 5-3805-261-34HYDRAULIC SYSTEM MAINTENANCE. (cont)10-4.PumpAssembly. (Sheet 6 of 23)DISASSEMBLY (cont)21.Install items 59 thru 138 as anassembly (Figure 10-25) infixture.22.Install two guide rods into head(95) and body (118).23.Remove three bolts (59), lock-washers (60), two bolts (61) andlockwashers (62).24.Separate head (95) from body(118) by sliding head (95) overguide rods.25.Remove two guide rods.26.Remove and discard gasket (63,Figure 10-26). Remove all gasketmaterial from mounting surfaces.27.Remove plate (64) from head (95).NOTECartridge assemblies must betagged as to their locationsbefore removing to aid ininstallation.28.Remove items 65 thru 76 and 77thru 83 as assemblies from head(95).29.Remove pistons (65 and 66) fromcartridge (76, Figure 10-27).30.Remove ring (67) and insert (68).31.Remove items 69 thru 74 as anassembly from cartridge (76).32.Remove ring (69), spacer (70),ring (71) and stop (72, Figure10-28).33.Remove spool (73) from sleeve(74).Go to Sheet 710-20Figure 10-28.Figure 10-27.Figure 10-26.Figure 10-25.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
