TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
10-3.
Hydraulic Pump Assembly and Mounting. (Sheet 6 of 7)
INSTALLATION
10.
Position items 30 thru 21 as an
assembly (Figure 10-8). Slide
onto mounting holes.
11.
Remove hoist and sling.
12.
Install new preformed packing
(20), tube assembly (19), flange
(18), clip (17) and four bolts
(16, Figure 10-7).
13.
Install tee (15).
14.
Connect hose assemblies (14 and
13).
15.
Install four washers (12) and
bolts (11) onto pump assembly
(24). Tighten four bolts (11) to
34 ft-lb.
Go to Sheet 7
10-13
Figure 10-8.
Figure 10-7.
