TM 5-3805-261-34
BRAKES MAINTENANCE. (cont)
6-4.
Parking Brake Actuator and Release Valve. (Sheet 6 of 6)
INSTALLATION
1.
Position items 22 thru 14 as an
assembly (Figure 6-3).
2.
Install bracket (13), two lock-
washers (12) and nuts (11).
3.
Install elbow (10) and nipple
(9).
4.
Position items 27 thru 23 as an
assembly.
5.
Install plug (8) and elbow (7) to
items 27 thru 23 as an assembly.
6.
Install two bolts (6), lock-
washers (5), nuts (4) on bracket
(13).
7.
Connect shop air line on elbow
(7).
8.
Install pin (3) to rod end (14).
9.
Install cotter pin (2) to pin
(3).
10. Apply air pressure to items 27
thru 23 as an assembly with shop
air line.
11. Disconnect shop air line from
elbow (7).
12. Connect hose assembly (1) to
elbow (7).
NOTE
Return 130G Grader to
original equipment condition.
End of Task
6-16
Figure 6-3.
