TM 5-3805-261-34
BRAKES MAINTENANCE.
6-4.
Parking Brake Actuator and Release Valve. (Sheet 3 of 6)
REMOVAL
8.
Remove items 23 thru 27 as an
assembly.
9.
Remove nipple (9) and elbow (10).
10. Remove two nuts (11), lockwashers
(12) and bracket (13).
11. Remove items 14 thru 22 as an
assembly.
DISASSEMBLY
1.
Loosen nut (15, Figure 6-4).
2.
Remove rod end (14).
3.
Remove nut (15).
4.
Install puller assembly, bearing
puller attachment and spacer on
items 16 thru 22 as an assembly
(Figure 6-5).
5.
Remove eight bolts (16).
WARNING
Exercise care when removing
parts under spring tension.
INJURY may result by the part
striking your eye if you do
not observe this precaution.
If your eye is struck by a
foreign object, seek medical
help immediately.
6.
Slowly release tension on spring
(18) with tooling.
7.
Remove puller assembly, bearing
puller attachment and spacer.
Go to Sheet 4
6-13
Figure 6-4.
Figure 6-5.
