TM 5-3805-261-34
BRAKES MAINTENANCE. (cont)
6-4.
Parking Brake Actuator and Release Valve. (Sheet 4 of 6)
DISASSEMBLY (cont)
8.
Remove cover (17) and spring (18)
from housing (22, Figure 6-6).
9.
Remove and discard preformed
packing (19) and seal (20) from
piston (21). Remove all seal
material from piston (21).
10. Remove four screws (23), cover
(24), seal (25) and diaphragm
(26) from body (27, Figure 6-7).
Discard seal (25) and diaphragm
(26). Remove all seal material
from cover (24).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
ASSEMBLY
1.
Install diaphragm (26) and new
seal (25) in body (27, Figure
6-7).
2.
Position cover (24) on body (27).
3.
Install four screws (23) on cover
(24).
Go to Sheet 5
6-14
Figure 6-6.
Figure 6-7.
