TM 5-3805-261-34
WIRING AND HARNESS MAINTENANCE.
4-17.
Main Harness. (Sheet 2 of 4)
REMOVAL
1.
Remove hood and four large plates
from steering console support.
Refer to TM 5-3805-261-20.
NOTE
All wire, cable and harness
assemblies must be tagged
before disconnecting to aid
in installation.
2.
Disconnect main harness assembly
from ether start valve, switches,
gages, monitoring system panel,
fuse box, starting motor and
alternator (Figure 4-87).
3.
Remove main harness assembly
mounting clips, clamps and cable
straps. Discard cable straps.
4.
Remove main harness assembly.
Figure 4-87.
4-87
