TM 5-3805-261-34
WIRING AND HARNESS MAINTENANCE.
4-16.
Rear Signal Light and Back-up Alarm Harness. (Sheet 5 of 5)
INSTALLATION
11.
Connect rear signal light and
back-up alarm harness assembly
(13) to rear floodlight harness
assembly (Figure 4-85).
12.
Install new cable strap (7).
13.
Install clip (6), washer (5) and
bolt (4).
14.
Connect rear signal light and
back-up alarm harness assembly
(13) to main harness assembly.
15.
Install three clips (3), washers
(2) and nuts (1).
NOTE
Return 130G Grader to
original equipment condition.
Figure 4-85.
End of Task
4-85
